SECCANT

SECCANT

SECCANT regeneration dryer: Drying air reliably and with zero maintenance – for high operating hour counts, high free air delivery rates and increased ambient temperatures

Dedicated B-CONTROL control: Independent of the compressor

Continuous drying: With two dryer chamber dryer modes working in parallel (dryer mode and regeneration mode)

Optimum FAD for your application: For air, gases and high operating hour counts

The regeneration dryers in the SECCANT series by BAUER KOMPRESSOREN for the pressure range from 90 to 350/420 bar have been designed to dry air and gases in applications in which operating hour counts, free air delivery rates and ambient temperatures are high.

These units, which are delivered ready for operation, are equipped with electronic control, smooth switch-over between regeneration and work cycles as standard, as well as featuring upstream separation and a particle filter.

The impressive unit concept also makes for easy integration into the overall system.

Activated carbon filters for oil removal and CO conversion (for the treatment of breathing air and air for use in medical applications, for example) can be added to meet your specific individual industrial requirements and production needs.

BAUER SECCANT high-pressure regeneration dryer – for air and nitrogen
Non-thermal adsorption dryer for NITROGEN		Free air capacity			Pressure range
Drying	Drying and oil removal	l/min	m³/h	cfm	90–350 bar	350–400 bar	350–420 bar
SECCANT III	SECCANT III A	500 – 1500	30 – 90	18 – 53		–
SECCANT IV	SECCANT IV A	1500 – 3500	90 – 210	53 – 124			–

BAUER SECCANT high-pressure regeneration dryer – for helium and argon
Non-thermal adsorption dryer for HELIUM + ARGON		Free air capacity			Pressure range
Drying	Drying and oil removal	l/min	m³/h	cfm	90–350 bar	350–400 bar	350–420 bar
SECCANT III H	SECCANT III AH	500 – 1500	30 – 90	18 – 53		–
SECCANT IV H	SECCANT III AH	1500 – 3500	90 – 210	53 – 124			–

BAUER Accessory Systems – The ideal enhancement to your compressor

Description

Control
The use of a dedicated control as standard for the regeneration dryers in the SECCANT series means that the dryers are able to operate independently of the compressor control.
All that is required is a start/stop signal from the compressor control.
The dryer control used also supports the transfer of additional data to the compressor control or other monitoring equipment via bus cable.

Continuous drying
The two dryer chambers work in parallel: one dryer chamber is operated in drying mode, the second is operated in regeneration mode. Automatic switch-over between the modes is controlled via the B-CONTROL control. This ensures a constant supply of treated medium.

Pressure retention valve
Equipping the SECCANT regeneration dryer with a compatible pressure retention valve safeguards the minimum pressure in the filter housings. Setting a minimum pressure prevents the maximum flow speed in the filter housing being exceeded. Contact time between medium and processingequipment is thus assured right from the outset.